Kuntzleman Electronics is now offering two special packages of its strobe and position light systems to builders of RV 7, 9, & 10 aircraft or any other kit that has like mounted wing lights. Due to the wing light configuration on these aircraft, the white rear facing LED on the regular Combo head is of no use, because it can’t be seen from the rear. A white position or tail light is then needed. So, we have put together two special kits with there own part numbers to make ordering easier.

DDM-RV Kit #1   $478

Kit #1 is a set of special heads. They are STROBE and RED / GREEN Position light equipped heads WITHOUT the white LEDs, a 2 strobe driver box, that fires both wing strobes in an alternating double wink pattern, a white round LED equipped tail light to be mounted at the rear of the aircraft. Also, included is 50 feet of 5 conductor shielded wire for the wings, plugs, pins and mounting hardware. Total power draw for this system is about 2 ½ Amps at 14 volts.

Kit #2 is a set of special heads. They are STROBE and RED / GREEN Position light equipped heads WITHOUT the white LEDs, a 3 strobe driver box, that fires both wing strobes in an alternating double wink pattern and a third STROBE and LED equipped round tail light for mounting at the rear of the aircraft. The tail strobe fires in sync with each wing. Also, included is 75 feet of 5 conductor shielded wire, plugs, pins and mounting hardware. Total power draw for this system is about 4 Amps at 14 volts.